So what’s the actual difference?
CFexpress is the card standard, but it comes in a few different physical sizes. Type A is the small one, and it’s what Sony uses in its FX cameras. Type B is noticeably bigger, and it’s what a lot of Canon and Nikon bodies use. It won’t physically go into a Type A slot.
Here’s why this trips so many people up. A lot of listings just say “CFexpress” in big letters and bury the type somewhere in the fine print, and Type B cards are often cheaper per gigabyte, so they look like a great deal. Then the card shows up and it doesn’t fit. So before you order anything, check that it clearly says Type A.
What each FX body supports
- FX3 and FX30: both slots take CFexpress Type A or SD UHS-II.
- FX2: slot 1 takes CFexpress Type A or SD. Slot 2 is SD only.
- FX5: both slots take CFexpress Type A or SD. X-OCN needs a VPG400 Type A card.
- FX6: both slots take CFexpress Type A or SD.
You’ll notice that every one of these slots also takes SD cards, which is really convenient. The catch is that the highest-bitrate recording modes can need CFexpress Type A or a fast V90 SD card. So if you’re not sure, it’s worth checking the recording media table in Sony’s help guide for your specific camera.
So which cards should you actually buy?
- Main card: a VPG400 CFexpress Type A card, especially for high frame rates.
- Second slot: a V90 UHS-II SD card for backups or proxies.
- Reader: one that handles both card types, like Sony’s MRW-G2.
That last one is easy to overlook, but Type A readers are a lot less common than Type B readers. If you get one that handles both Type A and SD, you’ll never be stuck on set without a way to offload.
And one more thing. Buy your cards from listings that are shipped and sold by Amazon or by the brand itself. Fake memory cards are a real problem, and the worst part is that you usually find out only after the footage is gone.
Want to see what else works with your camera? Pick your camera and you’ll see everything that fits it.